Categories

CONTACT US

Henan Lingmai Machinery Co.,Ltd
Add:Henan Zhengzhou Zhongyuan 1404 Room, Kaixuanmen Building
Tel:+86-371-56050201
Fax:+86-371-56630878
Ph:+8615838175355
E-mail:sales@lingmai-machinery.com

High Quality Electric Heating Sterilizer Retort

High Quality Electric Heating Sterilizer Retort

High Quality Electric Heating Sterilizer Retort operation method is setting the required temperature by power in advance and by pressing the control box for automatic temperature control.

Send Inquiry

Product Details


High Quality Electric Heating Sterilizer Retort 


Brief Introduction:

High Quality Electric Heating Sterilizer Retort also called electric steam semi-automatic autoclave. Steam source can provided by electric or steam. High Quality Electric Heating Sterilizer Retort operation method is setting the required temperature by power in advance and  by pressing the control box for automatic temperature control. The heat in High Quality Electric Heating Sterilizer Retort below a certain temperature can be automatically. You can set temperature automatically stop,In order to ensure the accuracy of the temperature during sterilization.

High Quality Electric Heating Sterilizer Retort(3).jpg

Working Principle:

1. Water filing 

Prior to the start of the process, electric heat sterilizer retort is filled with a small volume of process water such that the water level is below the bottom of the baskets. This water can be used for successive cycles if desired, as it is sterilizer with each cycle. 

2. Heating 

Once the cycle is begins, the steam valve opens and the circulation pump is switched on. The mixture of steam and water spraying from top of the retort vessel crates highly turbulent convection currents that rapidly homogenizes the temperature at every point in the retort and between the containers.  

3. Sterilization 

Once the programmed sterilization temperature has been reached, it is held for the programmed time with +/-1 °F . Similarly, the pressure is kept with +/- 1 psi by adding and venting compressed air as needed.  

High Quality Electric Heating Sterilizer Retort(2).jpg

4. Cooling 

At the end of the sterilization step, the retort switches into cooling mode. As the process water continues to be circulated through the system, a portion of it is diverted through on side of a plate heat exchanger. At the same time, cold water passes through the other side of plate heat exchanger. This results in the process water inside the retort chamber being cooled in a controlled fashion.  

5. End of cycle 

Once the retort is cooled to the programmed temperature set point, the cold water inlet valve on the heat exchanger closed and the pressure inside the retort is automatically relieved. The water level is lowered from the maximum down to the medium level. The door is equipped with a safety locking device which prevents the oping of the door in the case of residual pressure or high water level. 

High Quality Electric Heating Sterilizer Retort(1).jpg

Hot Tags: high quality electric heating sterilizer retort, China, manufacturer, factory, food processing, for tinned food, for canned food, vacuum package food, for aluminum foil package food

Previous:Spray Type Automatic Steam Sterilization Pot Next:Double Pot Retort

Related Products

Inquiry